Dahz.Net

Tag lists

Why pay attention to the installation of the wholesale column of the workshop isolation network manu

Why should we pay attention to the installation of workshop isolation net wholesale?

  The factory wholesale installation of the workshop isolation network should conform to the design drawing and coordinate with the road line type.

  The column should be firmly buried in the soil to reach the design depth and be perpendicular to the road surface.

   The pillars of general road sections can be constructed by the driving method, and they should be positioned correctly during construction. When the penetration is too deep, the *** pulls out all the pillars, and then re-drives after the foundation is compacted.

   When the driving method cannot be used, the excavation method can be used to bury the column. When burying the column, the fill should be made of good materials and compacted in layers (each layer should not exceed 15cm in thickness), and the compaction of the fill should not be less than the adjacent undisturbed soil. Pillar pits in the rock should be backfilled and compacted with pellets.

  The column can be installed by drilling. After the uprights are positioned, they should be backfilled with the same material as the roadbed and compacted in layers.

   When installing a column on a road section with a pavement, the column pit shall be backfilled with the same material as the roadbed and compacted in layers from the subgrade to 5cm below the surface layer, and the remaining part shall be backfilled and compacted with the same material as the pavement.

The horizontal and vertical directions of the    column should form a smooth line after installation.

   The gradient section of the guardrail and the end post should be installed according to the coordinates specified in the design.

  Choose high-quality fence mesh materials. We generally talk about metal fence netting. The quality of the metal material directly affects the quality of the fence netting. So the first is the judgment of metal materials. Good metal materials are hard and flexible, and are not easily damaged. We can bend them many times on site. Look at the reaction of metal materials.

Judgment of anti-corrosion materials for    fence netting. The anti-corrosion performance of a good fence is very good. We can see if there are any loopholes on the spot. once some low-level anti-corrosion is not well done, it will slowly affect the entire fence. Then there is the quality of the anticorrosive paint for the fence net, try to choose a good anticorrosive paint.

Why should pay attention to the installation of the workshop isolation net factory wholesale column?




X